Commercial epoxy flooring in Pompano Beach
PompanoEpoxy coats commercial floors across Broward: warehouse and flex units around Copans Road and the Pompano Beach Airpark, marine shops in Lighthouse Point and along State Road 84, Deerfield Beach industrial parks, and kitchens and showrooms on Atlantic Boulevard. Call to talk it through, or send the basics with the form.
Commercial floors






Example photos of finished commercial floors, shown for the look. Not photos of a specific PompanoEpoxy job. Ask for photos of comparable work before you book.
Where are the commercial floors around Pompano Beach?
Most are in the industrial blocks near Copans Road and the Airpark, the marine trade on the water, and the office and retail centers inland.
Most of the industrial space sits around Copans Road, the Pompano Beach Airpark and Andrews Avenue, in flex units with roll-up doors and wide slabs. Deerfield Beach has its own industrial parks off Hillsboro Boulevard. Lighthouse Point and the Intracoastal side of Pompano are marinas and boat yards, and the marine trade in Fort Lauderdale runs along State Road 84 and the river. Coral Springs and Coconut Creek add medical offices, gyms and retail centers.
Copans Road and the Airpark
Flex and warehouse units: forklifts, racking and roll-up doors open to the weather.
Lighthouse Point and the Intracoastal
Boat yards and marine shops: salt water, fuel and solvents.
State Road 84
Marine service and parts in Fort Lauderdale: heavy carts and daily spills.
Coral Springs and Coconut Creek
Clinics, gyms and retail: easy cleaning and a look customers notice.
What do Broward business owners ask before a floor job?
What has to come off the floor first, where the lines and zones go, where it needs grip, and how it gets cleaned afterward.
In a working warehouse or shop the hard part is rarely the coating. It is the racking bolted to the slab, the machines that cannot move far and the aisles that have to stay open. Walk through those with the crew before a date is set.
Racking and anchors
Shelving bolted to the slab comes up before the floor and goes back after. Decide who moves it.
Lines and zones
Aisles, walkways and parking stripes are built into the coating so they wear with the floor.
Grip by area
Wash bays, docks and kitchen lines get texture. Showrooms and offices can stay smooth.
Cleaning
Tell the crew which cleaners and degreasers you use so the topcoat is chosen to suit them.
What kind of floor does a warehouse or marine shop need?
One built for the traffic and spills it actually gets: forklifts and pallet jacks, oil and fuel, saltwater off trailers and hulls, and cleaning every day.
Pompano Beach and the cities around it are full of warehouses, boat and marine businesses, showrooms and restaurants, and no single floor suits all of them. The questions that decide it are practical: what rolls across the floor, what gets spilled, how wet it gets, how it is cleaned and how long the business can close.
Warehouses and distribution
Solid color coatings make a space brighter and spills easier to see, and aisle and safety lines can be built in. Polished concrete is an option where the slab suits it.
Marine service and boat storage
Saltwater dripping off trailers and hulls, plus fuel, oils and solvents. These floors need chemical resistance, and texture where they stay wet.
Showrooms
Boat, car and retail showrooms want a floor people notice: flake, metallic or polished concrete, built for foot traffic and rolling displays.
Restaurant and commercial kitchens
Florida inspections look for food-area floors that are smooth, durable, nonabsorbent and easy to clean. Quartz systems with a coved base at the walls are a common answer.
Can floor work be done without shutting the business down?
Often it can be planned in sections, over a weekend or in a slow stretch, but the coating's cure time decides when each area takes traffic again, so that gets worked out before the job is booked.
One area at a time
Large floors can be split into zones while work moves around the space.
Odor and fresh air
Some coatings smell strongly while they cure. Ask about the options for buildings that stay occupied.
Back in service
Ask for the times when each area can take people, carts and forklifts again.
What does commercial epoxy flooring cost in Pompano Beach?
Commercial floors are priced per project, because the system, the prep and the schedule move the cost more than the square footage does.
Price depends on the floor, so ask about yours. A clean slab in an empty unit and a working kitchen with tile to remove can be the same size and nothing alike in cost.
The existing floor
Old coatings, tile, adhesive or oil-soaked concrete add removal and prep.
The system
A thin coating, a thicker quartz build or a heavier system for wet, hot or chemical areas.
Edges and drains
Coved bases, trench drains and floor sinks take hand work.
Scheduling
Night, weekend or phased work changes the labor plan.
What does the job look like?
Start
Call or send the basics: the type of space, roughly how big it is, how it is used and when work could happen.
Ground work
Old coatings and adhesives usually come off, and the surface is ground and repaired so the coating has something to grip.
Coat and cure
The system goes down layer by layer, by section if the schedule needs it, then each area needs time before traffic. Ask for the schedule before work starts.

Questions business owners ask
How much does commercial epoxy flooring cost?
It is priced per project. The existing floor, the system the space needs, edges and drains, and when the work can happen all move the number more than square footage does. A clean slab in an empty unit and a working kitchen with tile to remove price very differently. Ask about yours. The quote is free.
Can safety lines and aisle markings be added?
Yes. Lines, walkways and marked zones are usually built into a warehouse or shop floor as part of the coating system rather than painted on later, so they wear with the floor. Send a sketch of the layout with your quote request, or ask about colors and widths when you call.
Is polished concrete an option for a warehouse?
It can be. Polished concrete is the slab itself, ground, hardened and polished, so there is no coating to wear through under forklifts. How it turns out depends on the slab you start with, including cracks, patches and old glue, so it is a question for the quote. The polished concrete page has more.
What floor does a commercial kitchen need in Florida?
Florida food areas call for a smooth, durable, nonabsorbent floor that is easy to clean, and a coved base at the wall removes the corner where dirt collects. Quartz systems are a common choice because they add grip in wet areas. Check the details with your inspector before work starts.
Can the floor be done with racking and shelving still in the building?
Often it can, one section at a time. Racking bolted to the slab has to come up where the coating goes, then goes back once that area has cured. Freestanding shelving can be moved zone by zone. Send the layout and say what cannot move, and the crew can plan the sections around it.